* This article explains the operation method of white electric assist bicycles. The operation method of black bicycles is currently under construction
- Smartphone Holder
- Bell
- Stand
- Saddle
Smartphone Holder
How to use a smartphone holder
* Please make sure that the smartphone holder is unlocked
Make sure that the pins on both sides of the smartphone are open.
① Insert the bottom of the smartphone into the smartphone holder.
② Carefully push the top of the smartphone holder upward, being careful not to pinch your hand.
③ Tilt the pins backwards and lock the smartphone holder.
* We cannot compensate for damage caused by the smartphone falling from the holder due to improper attachment. Please make sure to attach it securely.
How to remove a smartphone holder
① Tilt the pins on the smartphone holder forward to unlock it.
② Carefully lift the top of the smartphone holder, being careful not to pinch your hand.
③ Remove the top of the smartphone from the smartphone holder.
Bell
We attach the bell to the left side of the handle to alert people to danger. To ring the bell, rotate the grip located on the left side of the bell back and forth.
Center Stand
How to remove it
There is a center stand at the bottom of the bicycle. To remove it, press the stand against the ground and push the bicycle forward.
How to stand it up
① Step on the center stand at the bottom of the bicycle and fix it to the ground.
② While firmly fixing the center stand with your foot, lift the handle up.
③ When you pull the bicycle forward, the center stand will stand up
* Please note that if you are wearing sandals or other exposed footwear, you may be injured by rubbing against the center stand.
Saddle
The height of the saddle is fixed with a lever under the saddle. When adjusting the height of the saddle, lift this lever up.
When riding, fix the saddle to a height where your feet can touch the ground for safety, and always lower the lever before use.